Modifications apportées à l'étape #2
Modifié par Daniel Leon-Gijon —
Modification approuvée par Daniel Leon-Gijon
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the single |
|---|---|
| + | [* red] Remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard. |
| [* black] Once this screw has been removed. Unplug these two wires by gently puling them away from the motherboard. Hold the wire as close to the end as possible. |