Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #2

Modifié par Devon Paul —

Modification approuvée par Devon Paul

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
+[* red] Using a Phillips #0 screwdriver, remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard.
[* black] Once this screw has been removed. Unplug these two wires by gently puling them away from the motherboard. Hold the wire as close to the end as possible.