Modifications apportées à l'étape #2
Modifié par Daniel Luo —
Modification approuvée par Adam O'Camb
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Using a Phillips #0 screwdriver, remove the single 3mm Phillips head screw holding down the small metal bracket that covers where the small black and white wires connect to the motherboard. | |
| - | [* black] Once this screw has been removed. Unplug these two wires by gently puling them away from the motherboard. Hold the wire as close to the end as possible. |
| + | [* black] Once this screw has been removed. Unplug these two wires by gently puling them up and away from the motherboard. Hold the wire as close to the end as possible. |