Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Andrew

Modification approuvée par Andrew

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Insert the plastic opening tool in the narrow gap between the bottom of the case and the top side. Then find the clips in between that hold the case in place.
+[* black] Insert the plastic opening tool in the gap between the bottom of the case and the grated top side. Then find the clips in between that hold the case in place.
[* black] Once the clips are found, use the opening tool to pop the clips out. The best method is to pry the black case away from the bottom.
-[* icon_note] You will hear clicking sounds when you are prying the case open.
-[* icon_caution] These clips may be tough at first, but plastic is bound to bend or break. The next time you open the Xbox One S it may not clip back together...
+[* icon_note] You will hear clicking sounds when you are prying the case open. It may be fairly difficult to remove the bottom.
+[* icon_caution] It's possible that the clips may break when you remove the bottom from the case.
[* icon_note] We recommend starting at one corner and sliding the prying tool along the edges of the Xbox One S. Once the first few clips are opened you can lift the cover up to find the remaining clips.