Modifications apportées à l'étape #2
Modifié par Adam Redmond —
Modification approuvée par Adam Redmond
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Using a soldering iron set at 400 degrees Celsius (752 degrees Fahrenheit), heat the solder joints lateral to the USB port. Use a pair of tweezers to lift the port from the board. | |
| + | [* icon_caution] Extreme caution should be taken when working with high-temperature equipment to reduce the chance of burns. |
| + | [* icon_note] Care should be taken while desoldering the joints as the heat could melt the plastic casing on the port. It is strongly recommended that [guide|750|soldering surface-mounted components guide] is referenced before proceeding. |