Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par rubixtriangle

Modification rejetée par Jake Devincenzi

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Slide an opening tool between theCreate a gap from the back ofin the case towith an opening tool by gently prying the front.
[* black] After separating the sides, make sure there is a noticeable gap between the back case
top, bottom, and the restsides of the phone.
[* black] After detaching the tabs and sliding down the sides, there should be a noticeable gap between the front and back cases
case apart.
[* black] Slide an opening tool between theCreate a gap from the back ofin the case towith an opening tool by gently prying the front.
[* black] After separating the sides, make sure there is a noticeable gap between the back case
top, bottom, and the restsides of the phone.
[* black] After detaching the tabs and sliding down the sides, there should be a noticeable gap between the front and back cases
case apart.