Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #6

Modifié par Andrew Bookholt

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Disconnect the powerDC-in cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board by squeezingboard.
[* icon_note] After both locking arms pass their retaining tabs, it is helpful to push them toward
the two lock tabs andleft edge of your iMac with one hand while pulling it straight away from its socketon the body of the connector with your other hand.
[* black] Disconnect the powerDC-in cable by simultaneously depressing both locking arms and pulling its connector away from the socket on the logic board by squeezingboard.
[* icon_note] After both locking arms pass their retaining tabs, it is helpful to push them toward
the two lock tabs andleft edge of your iMac with one hand while pulling it straight away from its socketon the body of the connector with your other hand.