Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Francois P

Modification rejetée par David Hodson

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Remove the four recessed coarse-thread 7.5 mm T10 Torx screws securing the display to the rear case.
[* icon_note] These screws are recessed, so a thin screwdriver such as [product|IF145-014|thisproduct|IF145-080|this] is essential for removal. Bit drivers tend to be too short for this application. You will probably need to [product|IF145-029|magnetize] the screwdriver to put back the screws in place later.
[* icon_note] These screws are recessed, so a thin screwdriver such as [product|IF145-014|thisproduct|IF145-080|this] is essential for removal. Bit drivers tend to be too short for this application. You will probably need to [product|IF145-029|magnetize] the screwdriver to put back the screws in place later.