Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #3

Modifié par Andrew Bookholt

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove the single Phillips screw securing the inverter to the logic board.
[* black] Lift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight.
[* black] Lift the inverter straight up off the pins on the logic board.
[* icon_note] Be sure to lift the inverter straight up off the logic board, as the connector pins are very long and easily bent. If the pins bend during removal, use the connector on the inverter as a guide to bend them straight.

Image 1

Ancienne version

Nouvelle version