Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Walter Galan

Modification approuvée par Walter Galan

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Remove the following eight T5 Torx screws:
- [* red] Two 2.4 mm
- [* orange] Six 3.4 mm
+[* black] Remove the following eight screws securing the heat sink to the logic board:
+ [* red] Two 2.4 mm T5 screws
+ [* orange] Six 3.4 mm T5 screws
[* black] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_note] When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink.