Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Jake Devincenzi

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Insert wisdom here.
+[* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place.
+[* black] Slide the hinge cover out of its bezel, then lift it up and out of the device.
+[* icon_note] The screw in the right hinge cover should already have been removed.
+[* black] Slide the right cover out of its bezel, then lift it out of the device.

Image 1

Ancienne version

Nouvelle version