Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Walter Galan

Modification approuvée par Walter Galan

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the single 2.6 mm T5 Torx screw holding the left rubber hinge cover in place.
+[* red] Remove the single 2.6 mm T5 Torx screw securing the left rubber hinge cover in place.
[* black] Slide the hinge cover out of its bezel, then lift it up and out of the device.
[* icon_note] The screw in the right hinge cover should already have been removed.
[* black] Slide the right cover out of its bezel, then lift it out of the device.