Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Walter Galan

Modification approuvée par Walter Galan

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the two 4.0 mm T5 Torx screws from the power adapter.
-[* black] Slide the power adapter out of the upper case, then lift it out of the device.
+[* red] Remove the two 4.0 mm T5 Torx screws securing the MagSafe DC-In board to the upper case.
+[* black] Slide the MagSafe DC-In board towards the right free it from its recess within the upper case.
+[* black] Lift and remove the MagSafe DC-In board out of the upper case assembly.