Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Jake Devincenzi

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* black] Insert wisdom here.
+[* red] Remove the outer four 5.3 mm T8 Torx screws holding the hinges in place.
+[* icon_note] Do not remove the two inner screws just yet.
+[* black] Open the device between 90 and 100 degrees, then rest it on its side.
+[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
+[* red] Repeat the same process for the identical bottom screw.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Ancienne version

Nouvelle version