Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Walter Galan

Modification approuvée par Walter Galan

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Remove the outer four 5.3 mm T8 Torx screws holding the hinges in place.
-[* icon_note] Do not remove the two inner-most screws just yet.
-[* black] Open the device between 90 and 100 degrees, then rest it on its side.
-[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
-[* red] Repeat the same process for the identical bottom screw.
- [* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.
+[* red] Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.
+[* icon_note] We purposely have you leave one screw attaching the display to the upper case to aid in future steps.

Image 2

Supprimé

Image 3

Supprimé