Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Jake Devincenzi

Validation en attente


Lignes de l'étape

[* red] Remove the outer four 5.3 mm T8 Torx screws holding the hinges in place.
-[* icon_note] Do not remove the two inner screws just yet.
+[* icon_note] Do not remove the two innermost screws just yet.
[* black] Open the device between 90 and 100 degrees, then rest it on its side.
[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
[* red] Repeat the same process for the identical bottom screw.
+ [* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.