Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par garegin

Modification rejetée par Jake Devincenzi

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.
[* icon_note] We purposely have you leave two screws attaching the display to the upper case to aid in future steps.
+[* black] On the right side, the antenna cable has two ground tabs corresponding to the screwholes on the base. Make sure that the two tabs are held and go under those two screws.