Aller au contenu principal

Modifications apportées à cette étape

Modifié par Cara Steinke

Modification approuvée par Cara Steinke


Lignes de l'étape

[* black] Flip the controller so that the buttons are face up to prevent the vibration motors from falling out of the controller.
[* black] Remove the entire plastic faceplate by pulling up gently. Pull up on the top of the thumbsticks to remove. Pull up on the bottom of the thumbsticks to remove. This will expose the thumbstick assembly.
[* black] Remove the small black mode switch from the front of the controller.