Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Greg Chu

Modification approuvée par Greg Chu

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use tweezers to carefully remove the small ribbon cable that connects the back cover to the internals of the controller.
[* black] Unplug the ribbon cable on the side closest to the back cover by pulling the cable parallel to the surface of the circuit board.
[* black] Unplug the ribbon cable on the side closest to the back cover by pulling the cable parallel to the surface of the circuit board.
[* black] Remove the backplate from the main assembly that holds the motherboards by pulling them apart.

Image 1

Aucune image précédente

Ajouté(e)