Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Cara Steinke

Modification approuvée par Cara Steinke

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Use tweezers to carefully remove theicon_note] The small ribbon cable that connects the back cover to the internals of the controller.
[* black] UnplugUse tweezers to unplug the ribbon cable on the side closest to the back cover by pulling the cable parallel to the surface of the circuit board.
[* red] Use tweezers to carefully remove theicon_note] The small ribbon cable that connects the back cover to the internals of the controller.
[* black] UnplugUse tweezers to unplug the ribbon cable on the side closest to the back cover by pulling the cable parallel to the surface of the circuit board.
[* black] Remove the backplate from the main assembly that holds the motherboards by pulling them apart.