Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Cara Steinke

Modification approuvée par Cara Steinke


Lignes de l'étape

[* red] Remove the small black mode switch from the front of the controller.
[* black] Remove the backplate from the main assembly that holds the motherboards by pulling them apart.
[* icon_note] The small ribbon cable connects the back cover to the internals of the controller.
[* orange] Use tweezers to unplug the ribbon cable on the side closest to the back cover by pulling the cable parallel to the surface of the circuit board.