Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Greg Chu

Modification approuvée par Greg Chu

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Remove the small black mode switch from the front of the controller.
[* icon_note] The backplate gets a little stuck on the port at the bottom so you may have to use a prying motion to remove.
[* icon_caution] Be careful in the next step when pulling the main assembly apart from the backplate. There is a ribbon cable that connects the two parts that must stay in tact.
[*
black] Remove the backplate from the main assembly that holds the motherboards by pulling them apart.
[* icon_caution] Be careful in the next step when pulling the main assembly apart from the backplate. There is a ribbon cable that connects the two parts that must stay in tact.
[*
black] Remove the backplate from the main assembly that holds the motherboards by pulling them apart.