Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Greg Chu

Modification approuvée par Greg Chu

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Mark each motor according to the sidewhere it attaches. The rumble motors are different so they will not work if you switch them.
[* icon_note] Take note of where the red and black motor wires attach because they should be attachedreattached in the same way as the original.
[* icon_note] Use the [guide|750|Soldering Iron Guide] to help you with removing and attaching the wires
order.
[* black] Mark each motor according to the sidewhere it attaches. The rumble motors are different so they will not work if you switch them.
[* icon_note] Take note of where the red and black motor wires attach because they should be attachedreattached in the same way as the original.
[* icon_note] Use the [guide|750|Soldering Iron Guide] to help you with removing and attaching the wires
order.
[* black] Turn over the controller so that the thumbsticks are facing down.
[* red] Use tweezers and a soldering iron ([guide|750|Soldering Iron Guide]) to remove the black and red wires from the motherboard.
[* icon_note]
This will release the rumble motor from the controller assembly.
[* red] Use tweezers and a soldering iron ([guide|750|Soldering Iron Guide]) to remove the black and red wires from the motherboard.
[* icon_note]
This will release the rumble motor from the controller assembly.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version