Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Cara Steinke

Modification approuvée par Cara Steinke

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* blackred] Use tweezers and a soldering iron to remove the black and red wires from the motherboard. This will release the vibration motor from the controller assembly.
[* blackred] Use tweezers and a soldering iron to remove the black and red wires from the motherboard. This will release the vibration motor from the controller assembly.
[* icon_reminder] The vibration motors are different from each other so it is necessary to mark which motor comes from each side. Take note where the red and black wires attach because it is important that they are attached the same way as the original.