Aller au contenu principal

Modifications apportées à l'étape #6

Modifié par Cara Steinke

Modification approuvée par Cara Steinke

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Mark each motor according to the side it attaches. The vibrationrumble motors are different so they will not work if you switch them.
[* black] Mark each motor according to the side it attaches. The vibrationrumble motors are different so they will not work if you switch them.
[* icon_reminder] Take note where the red and black wires attach because they should be attached the same way as the original.
[* icon_note] Use the [guide|750|Soldering Iron Guide] to help you with removing and attaching the wires.
[* red] Use tweezers and a soldering iron to remove the black and red wires from the motherboard. This will release the vibrationrumble motor from the controller assembly.
[* red] Use tweezers and a soldering iron to remove the black and red wires from the motherboard. This will release the vibrationrumble motor from the controller assembly.