Modifications apportées à l'étape #5
Modifié par Jake Devincenzi —
Modification approuvée par Jake Devincenzi
- Avant
- Après
- Inchangé
Lignes de l'étape
+ | [* icon_note] Being careful not to rip any ribbon cables still connecting the two halves of the device, lay the device out so that you can access the back side of the display assembly. |
---|---|
[* black] Insert a plastic opening tool under the rubber holding the home button in place. | |
[* black] Slide the tool around the perimeter of the button, prying up as you go. | |
[* black] Lift the home button out of the device. |