Historique de l'étape n° 2 de iPod Touch 4th Generation Home Button Replacement

Modifications apportées à l'étape #2

Modifié par Jake Devincenzi — 18 juil. 2012

Modification approuvée par Jake Devincenzi

-	[* black] Insert wisdom here.
+	[* icon_caution] Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.
+	[* black] Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.
+	[* icon_caution] Do not try to pry between the black plastic bezel and the steel rear case.
+	[* black] Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.
+	[* icon_note] If it is too difficult to pry up the front panel assembly, reheat it and try again.