Modifications apportées à l'étape #2
Modifié par Oscar Ambriz —
Modification approuvée par Oscar Ambriz
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use a flat head screwdriver to push the thin metal rod out. |
|---|---|
| + | [* black] Use a flat head screwdriver to push the thin metal rod located on the side of the speaker out. |
| [* black] Using needle nose pliers grasp the rod and pull the rod out of the speaker until fully removed. | |
| - | [* black] Remove the remaining three rods. One present on the same side and two are located on the other. |
| + | [* black] Remove the remaining three rods. |
| + | [* icon_note] One is located on the same side and two are located on the other speaker. |