Modifications apportées à l'étape #3
Modifié par Oscar Ambriz —
Modification approuvée par Oscar Ambriz
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Insert a flat head screwdriver between the speakers and the base |
|---|---|
| + | [* black] Pry up allowing the speaker tabs to pop out of place. This does not require much force and result in a very faint audible response. |
| + | [* black] Once the speaker is lifted locate the wire which connects the speaker to the mother board. |
| + | [* black] Disconnect the wire from the motherboard by pulling in an upward motion. |
| + | [* black] Apply the same procedure to the second speaker. |