Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Removeblack] Gently peel the two Phillips screws securinginverter cable ground strap off the right AirPort antenna tocast aluminum frame of the clutch hinge frameworkhinges.
[* black] While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.
[* icon_note] If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces
.
[* red] Removeblack] Gently peel the two Phillips screws securinginverter cable ground strap off the right AirPort antenna tocast aluminum frame of the clutch hinge frameworkhinges.
[* black] While pulling the inverter cable away from its socket on the inverter board, use the tip of a spudger to push the connector out of its socket.
[* icon_note] If the connector won't budge from its socket, insert a metal spudger or similar tool into the gap between the connector and its socket and twist to separate the two pieces
.

Image 1

Ancienne version

Nouvelle version

Image 2

Aucune image précédente

Ajouté(e)

Image 3

Aucune image précédente

Ajouté(e)