Aller au contenu principal

Ce dont vous avez besoin

  1. dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: étape 1, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: étape 1, image 2 de 2
    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

  2. dreamGEAR Quad Dock Pro Power Board Replacement: étape 2, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement: étape 2, image 2 de 2
    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

  3. dreamGEAR Quad Dock Pro Power Board Replacement: étape 3, image 1 de 1
    • Gently remove the bottom of the device.

  4. dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: étape 4, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: étape 4, image 2 de 2
    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

  5. dreamGEAR Quad Dock Pro Power Board Replacement: étape 5, image 1 de 1
    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

  6. dreamGEAR Quad Dock Pro Power Board Replacement: étape 6, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement: étape 6, image 2 de 2
    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

  7. dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: étape 7, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: étape 7, image 2 de 2
    • Remove the four 1.8 mm PH0 screws that are holding the board in.

    • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

  8. dreamGEAR Quad Dock Pro Power Board Replacement: étape 8, image 1 de 1
    • Pick up the board.

    • Pick the board straight up, or you risk damaging the charging ports.

  9. dreamGEAR Quad Dock Pro Power Board Replacement: étape 9, image 1 de 1
    • Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jacob

Membre depuis le 11/03/2015

750 Réputation

6 tutoriels rédigés

Équipe

Colorado Springs, Team 4-4, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 4-4, Panko Spring 2015

UCCS-PANKO-S15S4G4

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 194