Réparez vos affaires Communauté Boutique

dreamGEAR Quad Dock Pro Power Board Replacement

Introduction

The Power Board is the board that charges the PS Move controllers. This is how you replace it.

Ce dont vous avez besoin

  1. dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: étape 1, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Prerequisite Guide to Accessing Interior: étape 1, image 2 de 2

    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

    Modifier

  2. dreamGEAR Quad Dock Pro Power Board Replacement: étape 2, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement: étape 2, image 2 de 2

    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

    Modifier

  3. dreamGEAR Quad Dock Pro Power Board Replacement: étape 3, image 1 de 1

    • Gently remove the bottom of the device.

    Modifier

  5. dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: étape 4, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Mother Board: étape 4, image 2 de 2

    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

    Modifier

  6. dreamGEAR Quad Dock Pro Power Board Replacement: étape 5, image 1 de 1

    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

    Modifier

  7. dreamGEAR Quad Dock Pro Power Board Replacement: étape 6, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement: étape 6, image 2 de 2

    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

    Modifier

  8. dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: étape 7, image 1 de 2 dreamGEAR Quad Dock Pro Power Board Replacement, Power Board: étape 7, image 2 de 2

    • Remove the four 1.8 mm PH0 screws that are holding the board in.

    • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

    Modifier

  9. dreamGEAR Quad Dock Pro Power Board Replacement: étape 8, image 1 de 1

    • Pick up the board.

    • Pick the board straight up, or you risk damaging the charging ports.

    Modifier

  10. dreamGEAR Quad Dock Pro Power Board Replacement: étape 9, image 1 de 1

    • Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Jacob

Membre depuis le 03/11/15

757 Réputation

6 tutoriels rédigés

Badges: 16

+ 13 badges supplémentaires

Équipe

Colorado Springs, Team 4-4, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 4-4, Panko Spring 2015

UCCS-PANKO-S15S4G4

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 250