Aller au contenu principal

Introduction

To complete this guide, you will need a PH 0 screwdriver and a spudger or similar prying device to access the interior of the Quad Dock Pro.

Pièces

Aucune pièce spécifiée.

  1. Remove the rubber foot pads on the bottom of the device using a plastic opening tool. Remove the rubber foot pads on the bottom of the device using a plastic opening tool.
    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

  2. Remove the six 2 mm PH0 screws on the bottom of the device. Four of those screws are located under the foot pads.
    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

  3. Gently remove the bottom of the device.
    • Gently remove the bottom of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jacob

Membre depuis le 11/03/2015

750 Réputation

6 tutoriels rédigés

Équipe

Colorado Springs, Team 4-4, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 4-4, Panko Spring 2015

UCCS-PANKO-S15S4G4

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 64