Réparez vos affaires Communauté Boutique

e-lite web150 Disassembly

Introduction

Im going to show how to open a leaf blower and put it back together. possibly for cleaning purposes.

Ce dont vous avez besoin

  1. e-lite web150 Disassembly, removing the blower nozzle: étape 1, image 1 de 1

    • Firmly press the yellow button and slide the blower nozzle off.

    Modifier

  2. e-lite web150 Disassembly, un-screwing: étape 2, image 1 de 1

    • un-screw all of the screws

    Modifier

  3. e-lite web150 Disassembly, opening: étape 3, image 1 de 1

    • pull apart the 2 halves

    Modifier

  4. e-lite web150 Disassembly, The inside: étape 4, image 1 de 1

    • This is the inside of the blower

    Modifier

  6. e-lite web150 Disassembly, pulling out the switch and plug: étape 5, image 1 de 2 e-lite web150 Disassembly, pulling out the switch and plug: étape 5, image 2 de 2

    • gently pull out the power plug and switch

    Modifier

  7. e-lite web150 Disassembly, removing the motor: étape 6, image 1 de 2 e-lite web150 Disassembly, removing the motor: étape 6, image 2 de 2

    • gently pull out the motor paying attention to which side it came out of.

    Modifier

  8. e-lite web150 Disassembly, putting the motor back in: étape 7, image 1 de 1

    • clean the dust out if you need to. then carefully put the motor back in making sure you put both of the tabs on the motor into their respective slots. you can't see the other one because I had to crop it out.

    Modifier

  9. e-lite web150 Disassembly, putting the plugs back in their places: étape 8, image 1 de 1

    • carefully put the plugs back into their holders.

    Modifier

  10. e-lite web150 Disassembly, closing it up: étape 9, image 1 de 1

    • fit the 2 halves back together

    Modifier

  11. e-lite web150 Disassembly, screwing in the screws: étape 10, image 1 de 1

    • replace all of the screws

    Modifier

  12. e-lite web150 Disassembly, re-attaching the blower nozzle: étape 11, image 1 de 1

    • slide the blower nozzle on to the main body until it locks in place, you are done.

    Modifier
Ligne d'arrivée

Une autre personne a terminé cette réparation.

Auteur

avec 1 autre contributeur

Alex Pollard

Membre depuis le 11/07/16

119 Réputation

1 tutoriel rédigé

Badges: 3

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 336