Introduction
Having the eufy Robovac 11s Max around the house can be a great help. However, issues can occur with the device. The bumper can need a replacement if the vacuum hits walls or has other sensory issues. This guide can help you replace the bumper.
Ce dont vous avez besoin
-
-
-
Flip the device upside down.
-
Remove the eight screws from under the vacuum where the bumper is placed using a Phillips screwdriver.
Demander à FixBot
-
-
-
-
Disconnect the cable that connects the bumper to the vacuum.
-
Remove the bumper pieces.
-
-
To reassemble your device, follow these instructions in reverse order.
Équipe
Sam Houston State, Team 7-5, Thornton Spring 2025 Membre de l'équipe Sam Houston State, Team 7-5, Thornton Spring 2025
SHSU-THORNTON-S25S7G5
3 membres
16 tutoriels rédigés
