Aller au contenu principal
Aide

ZTE Lever Motherboard Replacement

Route pittoresque

Route pittoresque

La procédure décrite dans ce tutoriel n'est peut-être pas la plus efficace pour effectuer le travail, mais elle peut s'avérer très utile dans certaines circonstances.

Replacement guide for the motherboard of a ZTE Lever.

  • Auteur: Luke Kilbourne
  • Durée estimée : 30 minutes
  • Difficulté: Difficile

Follow this guide to perform the replacement of the motherboard on a ZTE Lever smartphone.

Sections

Étape 1 Motherboard  ¶ 

Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard. Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard.

Étape 1 Motherboard  ¶ 

  • Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard.

Étape 2  ¶ 

Remove the bottom plastic motherboard cover with your fingers

Étape 2  ¶ 

  • Remove the bottom plastic motherboard cover with your fingers

Étape 3  ¶ 

Disconnect the camera from the motherboard with a plastic opening tool. Disconnect the camera from the motherboard with a plastic opening tool.

Étape 3  ¶ 

  • Disconnect the camera from the motherboard with a plastic opening tool.

Étape 4  ¶ 

Disconnect the display cable from the motherboard with a plastic opening tool.

Étape 4  ¶ 

  • Disconnect the display cable from the motherboard with a plastic opening tool.

Étape 5  ¶ 

Disconnect the camera from the motherboard with a plastic opening tool. Disconnect the camera from the motherboard with a plastic opening tool. Disconnect the camera from the motherboard with a plastic opening tool.

Étape 5  ¶ 

  • Disconnect the camera from the motherboard with a plastic opening tool.

Étape 6  ¶ 

Disconnect the rear speaker cable from the motherboard with a plastic opening tool.

Étape 6  ¶ 

  • Disconnect the rear speaker cable from the motherboard with a plastic opening tool.

Étape 7  ¶ 

Pry the motherboard cell battery from its position on the case of the phone

Étape 7  ¶ 

  • Pry the motherboard cell battery from its position on the case of the phone

Étape 8  ¶ 

Using the plastic opening tool, pry the motherboard  up, sliding along the edge  to separate the pieces. Using the plastic opening tool, pry the motherboard  up, sliding along the edge  to separate the pieces. Using the plastic opening tool, pry the motherboard  up, sliding along the edge  to separate the pieces.

Étape 8  ¶ 

  • Using the plastic opening tool, pry the motherboard up, sliding along the edge to separate the pieces.

Étape 9  ¶ 

Remove the motherboard with your fingers.

Étape 9  ¶ 

  • Remove the motherboard with your fingers.