Aller au contenu principal
Aide

Tristar Blender Disassembly

Meilleure introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

Tristar blender used for blending and mixing all kind of ingredients.

  • Auteur: koen merkx
  • Durée estimée : 7 minutes
  • Difficulté: Très facile
Outils
Pièces utiles

Étape 1 Tristar Blender Disassembly  ¶ 

The assembled mixer.

Étape 1 Tristar Blender Disassembly  ¶ 

  • The assembled mixer.

Étape 2  ¶ 

To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose. To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose. To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.

Étape 2  ¶ 

  • To disassemble the 3 parts you've got to disconnect the little ring. Use a screw driver to get the ring loose.

Étape 3  ¶ 

Unscrew 3 screws to open the casing. Unscrew 3 screws to open the casing. Unscrew 3 screws to open the casing.

Étape 3  ¶ 

  • Unscrew 3 screws to open the casing.

Étape 4  ¶ 

Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand. Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand. Unscrew 4 screws to  disassemble the  printplate and 2 to unscrew the wiring.  Then you can lift the motor out by hand.

Étape 4  ¶ 

  • Unscrew 4 screws to disassemble the printplate and 2 to unscrew the wiring. Then you can lift the motor out by hand.

Étape 5  ¶ 

To disassemble the motor holders you can slide them of the casing. To disassemble the motor holders you can slide them of the casing.

Étape 5  ¶ 

  • To disassemble the motor holders you can slide them of the casing.