Aller au contenu principal
Aide

Toshiba Satellite C55-A5310 RAM Replacement

Meilleure introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

How to replace the Toshiba Satellite C55-A5310 RAM.

  • Auteur: Kari Rodgers
  • Durée estimée : 5 minutes
  • Difficulté: Facile

Étape 1 RAM  ¶ 

Remove one JIS #000 screw. This screw does not come out all the way, but you will still be able to open the back panel.

Étape 1 RAM  ¶ 

  • Remove one JIS #000 screw.

  • This screw does not come out all the way, but you will still be able to open the back panel.

Étape 2  ¶ 

Use the plastic opening tool to pry the panel open. Be sure to do this on all four sides. Then the panel will lift off.

Étape 2  ¶ 

  • Use the plastic opening tool to pry the panel open. Be sure to do this on all four sides. Then the panel will lift off.

Étape 3  ¶ 

Take the nylon spudger, and push the prongs so that it releases the RAM. Take the nylon spudger, and push the prongs so that it releases the RAM. Take the nylon spudger, and push the prongs so that it releases the RAM.

Étape 3  ¶ 

  • Take the nylon spudger, and push the prongs so that it releases the RAM.

Étape 4  ¶ 

Once the RAM has lifted, use tweezers or fingers to pull it out. Once the RAM has lifted, use tweezers or fingers to pull it out. Once the RAM has lifted, use tweezers or fingers to pull it out.

Étape 4  ¶ 

  • Once the RAM has lifted, use tweezers or fingers to pull it out.