Aller au contenu principal
Aide

iPad 2 CDMA Front Panel Adhesive Strips Replacement

Replace the front panel adhesive in your iPad 2 CDMA.

Replace the adhesive securing the front panel to the rear case of your iPad 2 CDMA.

Before you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off.

Throughout this procedure, it is recommended to peel up each adhesive strip as needed.

Sections
Outils
Pièces utiles