Aller au contenu principal
Aide

LG Neon II Front Panel Replacement

Photos d’action

Photos d’action

Montrez ce dont un héros est capable ! Ce tutoriel a besoin d'images pour mieux illustrer certaines opérations spécifiques.

This guide takes apart the phone to access the speaker and LCD of the screen.

  • Auteur: Sara
  • Durée estimée : 30 minutes
  • Difficulté: Très difficile

The LG Neon II GW370, a cell phone released in 2010, is complete with a camera, music player, and slide out QWERTY keyboard. It comes in a variety of colors, the most common being blue, green, orange, red, and black.

Sections
Outils

Étape 1 Front Panel  ¶ 

After prying the circuit board up, it will be attached by black tape. This tape connects the circuit board to a metal rectangle.

Étape 1 Front Panel  ¶ 

  • After prying the circuit board up, it will be attached by black tape. This tape connects the circuit board to a metal rectangle.

  • Use the spudger between this metal rectangle and the phone to disconnect the two halves of the phone.

  • Once this step is complete the phone should be split in two.

Étape 2  ¶ 

Unscrew the four 1.75 mm screws located on both sides of the black tape using a Phillips #0 screwdriver.

Étape 2  ¶ 

  • Unscrew the four 1.75 mm screws located on both sides of the black tape using a Phillips #0 screwdriver.

  • There are two screws on each side.

  • The keyboard should now be fully detached from the phone.

Étape 3  ¶ 

Using the pointed end of the spudger (or something sharp like a safety pin or push pin), remove the plastic screw covers along the corners of the phone. Unscrew the four 3.5 mm screws that are underneath the covers.

Étape 3  ¶ 

  • Using the pointed end of the spudger (or something sharp like a safety pin or push pin), remove the plastic screw covers along the corners of the phone.

  • Unscrew the four 3.5 mm screws that are underneath the covers.

Étape 4  ¶ 

Flip the phone over. Using the plastic opening tool, remove the front casing from the phone. You should now be able to see the interior components of the screen.

Étape 4  ¶ 

  • Flip the phone over. Using the plastic opening tool, remove the front casing from the phone.

  • You should now be able to see the interior components of the screen.

  • When you pop the front panel off, the Call buttons will fall out.