Aller au contenu principal
Aide

LG env2 vx9100 Back Panel Replacement

Puces !

Puces !

Une bonne utilisation des balises, de la couleur et/ou du format des puces donnera de la clarté à ce tutoriel !

Texte bizarre

Texte bizarre

Certaines parties de ce texte sont confuses, répétitives ou hors-sujet. Modifie-les pour les rendre plus claires !

Outils incorrects

Outils incorrects

Participez à l'amélioration de ce tutoriel en utilisant les outils adaptés dans les photos et/ou le texte.

This guide describes the steps required to remove and install the back cover.

  • Auteur: Reed Williston
  • Durée estimée : 5 minutes
  • Difficulté: Facile

In this guide you will be removing the back panel from the rest of the phone.

Étape 1 Back Panel  ¶ 

Locate the five rubber covers on the back panel of the phone. Use the metal probe to pop out each rubber cover to reveal the screws underneath.

Étape 1 Back Panel  ¶ 

  • Locate the five rubber covers on the back panel of the phone.

  • Use the metal probe to pop out each rubber cover to reveal the screws underneath.

Étape 2  ¶ 

Locate the six 2.5mm screws on the back panel of the phone. Use a #00 Phillips screwdriver to remove each 2.5mm screw.

Étape 2  ¶ 

  • Locate the six 2.5mm screws on the back panel of the phone.

  • Use a #00 Phillips screwdriver to remove each 2.5mm screw.

Étape 3  ¶ 

Locate the seam around the edge of the phone. Insert the plastic opening tool into the seam and pry gently to release the tabs.

Étape 3  ¶ 

  • Locate the seam around the edge of the phone.

  • Insert the plastic opening tool into the seam and pry gently to release the tabs.

  • Work your way around the phone until all tabs are released.

  • Remove the back panel of the phone.