Aller au contenu principal
Aide

Plum Optimax 10 Motherboard Replacement

In this guide, we will be removing the motherboard of the Plum Optimax 10.

  • Auteur: Samantha Wright
  • Durée estimée : 5 minutes
  • Difficulté: Modérée

Users will be removing the motherboard throughout this guide by removing three 2mm screws with a flat head screwdriver. Be sure to be cautious when handling small pieces.

Étape 1 Motherboard  ¶ 

Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top. Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.

Étape 1 Motherboard  ¶ 

  • Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.

Étape 2  ¶ 

Once screws are removed, carefully remove the motherboard out of encasing.

Étape 2  ¶ 

  • Once screws are removed, carefully remove the motherboard out of encasing.