Aller au contenu principal
Aide

iPad Mini CDMA LCD Shield Plate Replacement

Replace the LCD Shield Plate in your iPad Mini CDMA.

Use this guide to replace the LCD shield plate.

Étape 1 LCD Shield Plate  ¶ 

Remove the following screws securing the LCD shield plate to the rear case of the iPad:

Étape 1 LCD Shield Plate  ¶ 

  • Remove the following screws securing the LCD shield plate to the rear case of the iPad:

  • Two 2.6 mm Phillips #00

  • Thirteen 1.7 mm Phillips #00

  • One additional 1.7 mm Phillips #00 on some devices.

Étape 2  ¶ 

Insert the flat end of a spudger underneath the center of the LCD shield plate from the bottom end of the iPad. Pry up on the spudger to free the plate from the sides of the rear case.

Étape 2  ¶ 

  • Insert the flat end of a spudger underneath the center of the LCD shield plate from the bottom end of the iPad.

  • Pry up on the spudger to free the plate from the sides of the rear case.

Étape 3  ¶ 

Remove the LCD shield plate from the iPad.

Étape 3  ¶ 

  • Remove the LCD shield plate from the iPad.