Aller au contenu principal
Aide

Sony Cyber-shot DSC-T9 LCD Replacement

This guide gives instructions on how to installed a new LCD onto the Sony Cyber-shot DSC-T9 camera.

This guide provides access to the LCD of the camera, which is necessary to remove for many other parts. Replacing the LCD is a common procedure for this camera.

Sections

Étape 1 LCD  ¶ 

Use the spudger to pry the LCD from the camera.

Étape 1 LCD  ¶ 

  • Use the spudger to pry the LCD from the camera.

Étape 2  ¶ 

The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.

Étape 2  ¶ 

  • The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.

Étape 3  ¶ 

Flip camera to other side. Use tweezers to peel off black sticker, located in middle of the motherboard.

Étape 3  ¶ 

  • Flip camera to other side.

  • Use tweezers to peel off black sticker, located in middle of the motherboard.

Étape 4  ¶ 

Use pry stick to pop out LCD connector ribbon, also called the ZIF connector. Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.

Étape 4  ¶ 

  • Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.

Étape 5  ¶ 

The LCD is now removed from the camera.

Étape 5  ¶ 

  • The LCD is now removed from the camera.