Aller au contenu principal
Aide

Front Inner Tube Replacement

Images incohérentes

Images incohérentes

Actualiser les images pour les adapter aux conditions préalables augmenterait la qualité de ce tutoriel.

A besoin de meilleures images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Here are some simple steps to fixing a flat inner tube on your bike.

  • Auteur: Theo Tzeng
  • Durée estimée : 30 minutes
  • Difficulté: Facile

Here's an easy step by step tutorial on removing and replacing the inner tube.

Étape 1 Front Inner Tube  ¶ 

First, remove the front wheel from the frame by unscrewing the adjustable screw First, remove the front wheel from the frame by unscrewing the adjustable screw

Étape 1 Front Inner Tube  ¶ 

  • First, remove the front wheel from the frame by unscrewing the adjustable screw

Étape 2  ¶ 

Next, wedge tire tool below the bike wheel, right above the rim. Once firmly in place, push the tire tool down towards the ground in order to create spacing between the tire and the rim. Following this, grab the 2nd tire tool and place it into the gap you have created.

Étape 2  ¶ 

  • Next, wedge tire tool below the bike wheel, right above the rim.

  • Once firmly in place, push the tire tool down towards the ground in order to create spacing between the tire and the rim.

  • Following this, grab the 2nd tire tool and place it into the gap you have created.

  • Slide the 2nd tool around the entire circumference of the tire, while holding the first in place, in order to dislodge the tire from the rim.

Étape 3  ¶ 

After removing the bike tire, locate the bike valve used to pump air into the tire. Gently remove the inner tube starting with the area around the valve.

Étape 3  ¶ 

  • After removing the bike tire, locate the bike valve used to pump air into the tire.

  • Gently remove the inner tube starting with the area around the valve.

  • Make a note of where the hole for the valve is located on the bike rim, because that is where the next step begins.

Étape 4  ¶ 

Pump a small amount of air into the new bike tube so that it is easier to work with.

Étape 4  ¶ 

  • Pump a small amount of air into the new bike tube so that it is easier to work with.

  • Next, locate the hole in the bike rim and feed the valve through and into position.

  • Next, wrap the rest of the tubing over the rim comfortably, while making sure that no folds or creases form on the tube.

Étape 5  ¶ 

Finish by placing the bike tire back on the the frame, while making sure that no fold or creases form in the tube. Lastly, pump air into the tire and remount onto bike frame.

Étape 5  ¶ 

  • Finish by placing the bike tire back on the the frame, while making sure that no fold or creases form in the tube.

  • Lastly, pump air into the tire and remount onto bike frame.