Aller au contenu principal
Aide

iBook G4 14" 933 MHz-1.33 GHz LCD Cover Replacement

Conditions préalables uniquement

Conditions préalables uniquement

Notez qu'il ne s'agit que de conditions préalables pour d'autres tutoriels.

This is an internal prerequisite guide that should remain unpublished.

Étape 1 LCD Cover  ¶ 

Remove the pieces of readily removable tape from around the perimeter of the display. Carefully remove the aluminum tape covering the display data cable connection.

Étape 1 LCD Cover  ¶ 

  • Remove the pieces of readily removable tape from around the perimeter of the display.

  • Carefully remove the aluminum tape covering the display data cable connection.

Étape 2  ¶ 

Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display. Use the tip of a spudger to remove the small washer under the screw you just removed.

Étape 2  ¶ 

  • Remove the single screw inserted through the piece of EMI tape near the bottom edge of the display.

  • Use the tip of a spudger to remove the small washer under the screw you just removed.

Étape 3  ¶ 

Peel the aluminum/EMI tape off the cast aluminum frame of the clutch hinges.

Étape 3  ¶ 

  • Peel the aluminum/EMI tape off the cast aluminum frame of the clutch hinges.

  • It is not necessary to peel the tape off the thin steel LCD cover.

Étape 4  ¶ 

Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total). Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).

Étape 4  ¶ 

  • Remove the two Phillips screws securing each side of the LCD to the clutch hinge frame (four screws total).

Étape 5  ¶ 

Lift the thin steel LCD cover off the LCD.

Étape 5  ¶ 

  • Lift the thin steel LCD cover off the LCD.