Aller au contenu principal
Aide

PowerBook G4 Aluminum 12" 867 MHz Logic Board Replacement

  • Auteur: iRobot
  • Difficulté: Difficile

This motherboard includes all ports except the DC-In board.

Sections

Étape 1 Logic Board  ¶ 

Remove the two Phillips screws from the bottom right of the logic board.

Étape 1 Logic Board  ¶ 

  • Remove the two Phillips screws from the bottom right of the logic board.

  • Do not lift the logic board out without disconnecting the DC-In connector underneath the logic board.

Étape 2  ¶ 

Lift the logic board partly up from the optical side.

Étape 2  ¶ 

  • Lift the logic board partly up from the optical side.

Étape 3  ¶ 

Disconnect the DC-In connector from the underside of the logic board.

Étape 3  ¶ 

  • Disconnect the DC-In connector from the underside of the logic board.