Aller au contenu principal
Aide

Imation Superdisk USB Drive Plastic Arm Replacement

Puces !

Puces !

Une bonne utilisation des balises, de la couleur et/ou du format des puces donnera de la clarté à ce tutoriel !

Problème de balisage

Problème de balisage

Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.

Étapes à raccourcir

Étapes à raccourcir

Ce tutoriel contient des étapes inutiles. Raccourcissez-le pour plus de précision !

Meilleure introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

This guide will show you how to access the plastic arm on the Imation Superdisk USB drive and remove it.

  • Auteur: Brittini
  • Durée estimée : 5 minutes
  • Difficulté: Modérée
Sections
Outils

Étape 1 Plastic Arm  ¶ 

Flip the device over so the plastic arm is face up.

Étape 1 Plastic Arm  ¶ 

  • Flip the device over so the plastic arm is face up.

Étape 2  ¶ 

Remove the small spring that connects the plastic arm to the disk drive. To the keep the spring from flying in the air and getting lost, put your finger on one end of the spring to hold it in place while you detach the other end. It does not matter which end you chose to detach first.

Étape 2  ¶ 

  • Remove the small spring that connects the plastic arm to the disk drive.

  • To the keep the spring from flying in the air and getting lost, put your finger on one end of the spring to hold it in place while you detach the other end. It does not matter which end you chose to detach first.

Étape 3  ¶ 

Locate the tab with a raised dot on the immobile end of the plastic arm. Apply pressure on the plastic tab and slide it backwards to release that end of the arm from the disk drive. Apply pressure on the plastic tab and slide it backwards to release that end of the arm from the disk drive.

Étape 3  ¶ 

  • Locate the tab with a raised dot on the immobile end of the plastic arm.

  • Apply pressure on the plastic tab and slide it backwards to release that end of the arm from the disk drive.

Étape 4  ¶ 

Rotate the plastic arm until it fits through the opening in the disk drive and pull it out. Completely remove the plastic arm from the disk drive. Replace the arm if it is broken or set it aside and continue to your next task.

Étape 4  ¶ 

  • Rotate the plastic arm until it fits through the opening in the disk drive and pull it out.

  • Completely remove the plastic arm from the disk drive.

  • Replace the arm if it is broken or set it aside and continue to your next task.