Aller au contenu principal
Aide

HP Deskjet D1660 Rollers Replacement

Replace the rollers so that the paper will smoothly run through the printer.

This guide will replace the small rollers located under the ink carriage. Rollers enable the papers to run smoothly through the printer and cleanly print out material.

Sections
Outils

Étape 1 Rollers  ¶ 

Remove the five 13.0 mm Torx #10 screws found on top of the frame. Remove the four 9.0 mm Torx #10 smaller screws.

Étape 1 Rollers  ¶ 

  • Remove the five 13.0 mm Torx #10 screws found on top of the frame.

  • Remove the four 9.0 mm Torx #10 smaller screws.

Étape 2  ¶ 

Lift the cover up using both of your hands. Lift it carefully as a strip and motor will be connected to the bottom part of the printer.

Étape 2  ¶ 

  • Lift the cover up using both of your hands.

  • Lift it carefully as a strip and motor will be connected to the bottom part of the printer.

Étape 3  ¶ 

Locate the rollers, which will be on the bottom of the metal frame that holds the carriage. Grab the rollers and remove them by pulling them to one side and lifting them up.

Étape 3  ¶ 

  • Locate the rollers, which will be on the bottom of the metal frame that holds the carriage.

  • Grab the rollers and remove them by pulling them to one side and lifting them up.

  • Do the same for the other three.