Aller au contenu principal
Aide

Dell Latitude X300 Screen Replacement

A besoin de meilleures images

A besoin de meilleures images

De meilleures photos amélioreront ce tutoriel. Aider en proposant de nouvelles photos!

Meilleure introduction

Meilleure introduction

Améliorez ce tutoriel en complétant ou modifiant l'introduction.

This will guide will explain the steps required to replace the Dell Latitude X300 screen.

  • Auteur: Jacob
  • Difficulté: Modérée

Étape 1 Screen  ¶ 

Make sure the Dell Latitude X300 power is off.

Étape 1 Screen  ¶ 

  • Make sure the Dell Latitude X300 power is off.

  • Remove the battery located on the bottom of the device by pushing in both clips.

Étape 2  ¶ 

Remove rubber caps on each corner of the front screen with a pinch. Remove the 4 mm screws located on the front screen of the laptop.

Étape 2  ¶ 

  • Remove rubber caps on each corner of the front screen with a pinch.

  • Remove the 4 mm screws located on the front screen of the laptop.

Étape 3  ¶ 

Carefully, remove the screen casing using either your hands or a proper tool.

Étape 3  ¶ 

  • Carefully, remove the screen casing using either your hands or a proper tool.

  • The casing is very flimsy, so extreme care is required.

Étape 4  ¶ 

Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

Étape 4  ¶ 

  • Remove the 4 mm screws on the bottom left and bottom right corner of the screen.

Étape 5  ¶ 

Carefully lift the screen and place it on it's face. Disconnect the wiring attached to the screen.

Étape 5  ¶ 

  • Carefully lift the screen and place it on it's face.

  • Disconnect the wiring attached to the screen.

  • It is important not to damage this wire.